|
|
Flash Disk Module
Flash Disk Module Specification applies to all sizes
| |
|
An ideal storage device for LTSP based workstations.
|
DisklessWorkstation's Flash Disk Module (FDM) is a solid
state design
and standard ICE interface compatible. It is an ideal replacement
for applications that need only low capacity disk drives.
It is suitable for many applications. It is fully compatible
with applications such as CPU mother boards, set top boxes,
POS (point-of-sale), vending machines, GPS (global positioning
systems), industrial panels, PCs, test equipment, measuring
instruments, and embedded systems. The FDM is excellent for
applications were eliminating moving parts is a requirement.
Flash Disk Module Features
- Available in the following capacities: 4, 16, 32,
64, 128 MB (unformatted)
- Standard 40 pin IDE interface/connector
- Firmly hooked in existing standard IDE 40 pin IDE socket
- Support wear leveling function to extend the life of
flash memory
- Support built-in ECC function to automatically detect
and correct data errors
- Endurance: 1M Program Erase cycles
- Data Retention: 10 years
- Supports LTSP based DisklessWorkstations
- Supported operating systems: Linux, Unix, QNX, OS2,
DOS, and Win95/98/NT/2000/XP/CE
- Vibration Shock resistant, seek error free and rugged
- Master or Slave jumper setting
- No driver needed
- MTBF: 500,000 hours
- Support up to PIO Mode 4
Environment Specification
| Temperature
|
Operating, Non-operating: 0 to 70 degrees C
Storage Temperature: -40 to +85 degrees C
|
| Humidity
|
Operating: 5% to 95%, Non-Operating: 5% to 95%
(non-condensing)
|
| Acoustic Noise
|
0 dB
|
| Vibration
|
Operating: MIL-STD-202F, Method 204D Condition B
10~70Hz 0.03in., 70~2000Hz 15g, 20min/cycle, 12 cycles/axis
|
| Shock
|
Operating: MIL-STD-202F, Method 213B Condition A
Half Sine, 50G, 6ms
|
Power Consumption
| DC Input Voltage (VCC) 100mV max. ripple (p-p)
|
Mode
|
3.3V +/-5%
|
5V +/-10%
|
| +5V Currents (maximum average value)
|
Sleep:
Reading:
Writing:
|
< 200uA
< 25mA
< 30mA
|
< 500uA
< 50mA
< 60mA
|
|
|
|
|
